Nvidia 4 Migrating from RAID 0 (with One Disk) to RAID 1 (with Two Disks)

NVIDIA Corporation 77
CHAPTER 3
Using the NVIDIA MediaShield RAID Management Utility
Migrating from RAID 0 (with One Disk) to RAID 1 (with Two Disks)
The following example shows you how to convert a RAID 0 array with one disk to a RAID
1 array (with two disks)
1Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2Boot to Windows, launch the MediaShield application, then follow the steps outlined in
“Creating a Striped Array” on page 47 with the exception that you need to select one
disk instead of two disks.
When that is done, you should see a screen shot similar to the following:
Figure 3.60 RAID Array Created
3Click click on Striping and select “Convert Array...” as shown in the following screen
shot:
Figure 3.61 Selecting “Convert Array” from the Pop Up Menu