3.5 TV-OUT Function Instructions
NOTE:
Before you power on your system, you have to be sure the VGA card is installed already and all the cables are connected to prevent form the card get burnt.
3.5.1 How to enable the TV-OUT function
Warning:
The VGA card needs to see real 75 ohms AV input. Connect the signal cable between
1.Boot up the system from monitor.
2.To Connect the signal cable between
3.After launch ‘Display Properties’ window then:
1.Click ‘Settings’
2.Click ‘Advanced…’
3.Click ‘nView’
4.Click ‘Device Setting’
5.Click
‘Select Output Device’
6.Click ‘Advanced’
13