nVIDIA N61P/N61S/N61V

User's /Manual

 

 

 

OnChip IDE Channel 0

 

 

The mainboard chipset contains a PCI IDE interface with support for two IDE channels.

 

 Select “Enabled” to activate the first and/or second IDE interface. Select “Disabled” to

 deactivate an interface if you are going to install a primary and/or secondary add-in IDE

 interface.

 Primary Master/Slave PIO

 Each IDE channel supports a master device and a slave device. These four items let you

 assign the kind of PIO (Programmed Input/Output) were used by the IDE devices. Choose Auto to let the system auto detect which PIO mode is best, or select a PIO mode from 0-4.

 Primary Master/Slave UDMA

  Each IDE channel supports a master device and a slave device. This mainboard supports

 

 UltraDMA technology, which provides faster access to IDE devices. If you install a device

 that supports UltraDMA, change the appropriate item on this list to Auto. You may have

  to install the UltraDMA driver supplied with this mainboard in order to use an UltraDMA

 

 device.

 IDE DMA transfer access

 This item allows you to enable the transfer access of the IDE DMA then burst onto the

 PCI bus and nonburstable transactions do not.

 Serial-ATA Controller

 

Available options: [Disabled] [Enabled]

 

 

IDE Prefetch Mode

 

 

The “ onboard” IDE drive interfaces supports IDE prefetch function for faster drive

 

 access. If the interface on your drive does not support prefetching, or if you install a

 primary and/or secondary add-in IDE interface, set this option to “Disabled”.

 • Back to Integrated Peripherals Setup Menu►RAID Config

Click <Enter> key to enter its submenu:

Phoenix - AwardBIOS CMOS Setup Utility

RAID Config

RAID

Enable

 

[Disabled]

Item Help

x SATA

1

Pri-Master

RAID

Disabled

 

x SATA

1

Secondary

RAID

Disabled

Menu Level ►►

x SATA

2

Primary

RAID

Disabled

 

x SATA

2

Secondary

RAID

Disabled

 

→←

:Move Enter:Select

+/-/PU/PD:Value

F10:Save

ESC:Exit

F1:General Help

↑↓

 

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

 RAID Enable

 Available options: [Disabled] [Enabled]  

 SATA 1/2 Pri-Master/Primary/Secondary/Primary RAID

 This option allows you to enable or disable SATA Primary/Secondary RAID.

 This is configurable only when “RAID Enable” is set to “Enabled”.

 • Back to Integrated Peripherals Setup Menu

・Onboard Lan Chip

This option enables or disables the LAN controller.

- 26 -