nVIDIA N61P/N61S/N61V

User's /Manual

 

 

・OnChip USB

This option allows you to disabled the USB function or select the mode of USB.

・USB Memory Type

Available options: [Base Memory (640K)] [Shadow].

・USB Keyboard Support

This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS environment.

・USB Mouse Support

This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] in OS environment.

・HD Audio

This item allows you to enable or disable the HD audio.

・MAC Lan

Available options: [Disabled] [Enabled].

・MAC Media Interface

Available options: [Disabled] [Enabled].

・Machine MAC(NV) Address Available options: [Disabled] [Enabled].・MAC(NV) Address Input

This is configurable only when “Machine MAC(NV) Address” is set to “Enabled”.

IDE HDD Block Mode

Enable this field if your IDE hard drive supports block mode. Block mode enables BIOS to automatically detect the optimal number of block read and writes per sector that the drive can support. It also improves the speed of access to IDE devices.

・POWER ON Function

This item selects the way you want your system to power on.

[Password]: Use a password to power on the system, select this option then press

 <Enter>. Enter your password. You can enter up to 5 characters. Type in

 exactly the same password to confirm, and then press <Enter>.

[Hot KEY]: Use any of the function keys between <Ctrl+F1> to <Ctrl+F12> to power

 on the system.

・KB Power ON Password

If you select [Password],this function will be activation.

Press ‘Enter’, and input your password (1-5 characters), then press 'Enter' again.

・Hot Key Power ON

If you select [Hot Key], this function will be activation. Available options: Ctr-F1~F12

・Onboard FDC Controller

This option enables or disables the onboard FDC controller.

・Onboard Serial Port 1

This item determines which I/O addresses the onboard Serial Port controller will access.

[Auto]: The system automatically select an I/O address for the onboard Serial Port.

 [3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allow you to manually select an

 I/O address for the onboard Serial Port.

[Disabled]: Disables the onboard Serial Port.

 

・ UART Mode Select

 

This item allows you to choose the routine IrDA protocol or ASKIR protocol. The IrDA

maximum speed is 115.2K bps; ASKIR maximum speed is 57.6K bps. Default setting is

 

Normal.

 

・RxD , TxD Active

Active This items allows you set the transport speed of the IR devices.

- 27 -