Configuring Your 3000 Series Secure Gateway Router
1.At the * prompt, enter config to display the Config> prompt.
*config Config>
2.Enter qconfig at the Config> prompt to begin Quick Config.
3.Proceed through the Quick Config questions to set (or change) the parameters you need for your particular configuration.
To exit Quick Config, type r for restart at any prompt and follow the queries until you type no and then q for quit.
Using the Command Line Interface
You can get extensive documentation on the Command Line Interface (CLI) software that runs on the 3000 Series. This documentation is available on the
Online Library CD included in your 3000 Series package and also on the Nx Networks Web site at www.nxnetworks.com.
Accessing the 3000 Series Documentation Set
On the Nx Networks Web site (www.nxnetworks.com),
1.Click Support Services.
2.Click User Documentation.
You now have access to an online version of this manual and also to the complete set of software documentation.
30 | 3000 Series User Guide |
