Nx Networks 3000 manual Connecting to a WAN, Selecting a WAN Cable

Connecting Your 3000 Series Secure Gateway Router

S/T	U
Interface	Interface	ISDN
		Network
	NT1
	ISDN
3000 Series	Wall Jack

100 Ohm Termination

Connecting to a WAN

To connect your 3000 Series to the Internet or another WAN using the standard WAN module, use Point-to-Point Protocol (PPP) over either a dedicated (leased) or a dialup telephone line or use a Frame Relay network.

Selecting a WAN Cable

You must purchase the appropriate cable from a Nx Networks vendor. The type of WAN cable you use depends on the interface type that the equipment you connect to supports.

To connect to a device that has a

•Data Communications Equipment (DCE) connector, use a Data Terminal Equipment (DTE) cable.

•DTE connector, use a DCE cable.

WAN

18 3000 Series User Guide