Do not connect the AC power cord until all other connections |
|
have been made. | Continued |
To select the color system | Adjusting the Voltage Selector |
English
You can select the video output to match it to the color system of your TV.
Set the PAL/NTSC switch on the rear correctly while in standby mode.
NTSC: For an NTSC TV.
PAL: For a PAL TV.
• For a
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the bottom of the unit.
Move the voltage selector so the voltage number is the same as the voltage where you are plugging in the unit. (See the back cover page.)
DO NOT plug in before setting the voltage selector on the bottom of the unit and all connection procedures are complete.
Connecting Other Equipment
You can connect an audio equipment as a playback device. When you connect and use this equipment, refer also to its manual.
• DO NOT connect any equipment while the power is on.
•DO NOT plug in any equipment until all connections are complete.
For playing the other equipment through this unit,
connect between the audio output jacks on the other equipment and AUX IN jacks by using audio cords (not supplied).
•Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.
R | L |
Audio/video equipment
To audio output
NOW you are ready to plug in the unit.
•If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.
IMPORTANT:
Be sure to check that all connections have been made before plugging in the power cord.
