Playing Back Tapes
You can play back only type I (Normal) tapes. | To play the tapes in the decks B and A continuously |
English
Playing Back a Tape
1 Press STOP/EJECT 7 /0 for the deck you want to use.
For Deck A
For Deck B
2 Put a cassette in, with the exposed part of the tape down.
3 Close the cassette holder gently.
4 Press TAPE.
| TAPE |
On the remote control: | AUX |
| TAPE/ |
Press TAPE/AUX repeatedly to select TAPE.
1 Set the cassette tapes in the decks A and B.
•If the source is not TAPE, select the tape for source. (See page 10.)
•If the tape direction is set wrong, replace the cassette.
2 Press PLAY 3 for the deck B.
The tape in the deck B begins to play.
3 Press PAUSE 8, then press PLAY 3 for the deck A.
When the tape in the deck B ends, the tape in the deck A automatically begins to play.
PAUSE
The use of the
5 Press PLAY 3.
The tape play starts.
When the tape plays to the end, the deck automatically stops.
To stop during play, press STOP/EJECT 7/0.
To operate the other deck, press STOP/EJECT 7/0, then
PLAY 3 on the other deck.
To fast wind to the left or to the right, press REW 1/
FF ¡ while the tape is not running.