| Getting Started | have been made. | Continued | ||
| Do not connect the AC power cord until all other connections |
| ||
|
|
|
|
|
|
|
|
|
|
Unpacking |
|
| Connecting the Speakers |
|
|
|
|
|
|
English
After unpacking, check to be sure that you have all the following items.
The number in the parentheses indicates the quantity of the pieces supplied.
•Remote control (1)
•AC power cord (1)
•Battery for remote control
•AC plug adapter (1)
•Audio/video cord (1)
If any is missing, consult your dealer immediately.
Putting the Batteries into the Remote Control
Insert the
When the remote control can no longer operate the unit, replace both batteries at the same time.
1
2
3
To connect speakers
You can connect the speakers using the speaker cords.
1 |
| 2,3 |
SPEAKER IMPEDANCE 3Ω | 16Ω | |
R | L |
|
Red |
| Red |
Speaker |
| Speaker |
cord |
| cord |
| Black |
|
Right speaker |
| Left speaker |
1Hold the clamp of the speaker terminal.
2Insert the end of the speaker cord into the
terminal.
Match the polarity of the speaker terminals: red (ª) to red (ª) and black (·) to black (·).
•DO NOT use an old battery together with a new one.
•DO NOT use different types of batteries together.
•DO NOT expose batteries to heat or flame.
•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, it will be damaged from battery leakage.
3Release the finger from the clamp.
IMPORTANT:
•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
•DO NOT connect more than one speaker to one speaker terminal.
