JVC PC-X292V manual Recording onto a Tape on Deck A, Close the cassette holder gently, English

English

Recording

IMPORTANT:

•It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.

•The recording level is automatically set correctly, so it is not affected by the VOLUME +/–. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.

•While recording, you can hear sound modes through the speakers or headphones (see page 11). However, the sound is recorded without these effects.

•If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit.

•You can use only type I (Normal) tapes for recording.

To protect your recording Cassettes have two small tabs on

the back to protect unexpected erasure or re-recording. To protect your recording,

remove these tabs.

To re-record on a protected tape, cover the holes with adhesive tape.

To keep the best recording and playback sound quality

If the heads, capstans, and pinch rollers of the cassette decks become dirty, the following will occur:

•Impaired sound quality

•Discontinuous sound

•Fading

•Incomplete erasure

•Difficulty in recording

To clean the heads, capstans, and pinch rollers

Use a cotton swab moistened with alcohol.

Recording onto a Tape on Deck A

On the unit ONLY:

1 Put a recordable cassette into the deck A with the exposed part of the tape down.

• See also page 22.

2 Close the cassette holder gently.

3 Start playing the sourceÑFM, AM*, disc

player, deck B, or auxiliary equipment connected to AUX IN jacks.

•When the source is disc, you can also use Disc Synchronized Recording (see page 24).

•When the source is the deck B, you can also use the dubbing method. (See “Dubbing Tapes” on page 24.)

* See “To reduce the beat—Beat Cut” below.

4 Press REC ¶ for the deck A.
	REC
The recording starts.

To stop during recording, press STOP/EJECT 7/0 for the

deck A.

To remove the cassette, press STOP/EJECT 7/0 for the deck A.

You cannot press REC ¶ in the following cases:

•If no cassette is inserted.

•If a protected tape is inserted.

	Capstan	To reduce the beat—Beat Cut
		If the beats are heard while recording an AM
		broadcast, press FM MODE/BEAT CUT
		repeatedly until the beats are reduced.
		Each time you press the button, the display alternates
		between “CUT – 1” and “CUT – 2”.
Erase head	Head	Pinch roller
(only for the deck A)

To demagnetize the heads

Turn off the unit, and use a head demagnetizer (available at electronics and CD shops).

As the erase head of the unit is of magnetic type, do not demagnetize it.

– 23 –