NXR BX3062, DRGB4801 Care And Cleaning, Metal Finishes, Plastic Finishes, Oven Racks, Oven Frame

Models: BX3062 BX3031 DRGB4801

1 26
Download 26 pages 56.3 Kb
Page 23
Image 23

CARE AND CLEANING

Metal Finishes

Wash with soap and water, glass cleaner, or mild liquid spray.

Plastic Finishes

When control panel trim and end caps are cool, clean with soap and water, rinse and dry.

Use a glass cleaner and soft cloth.

Oven Racks

Clean oven racks with solution of detergent and hot water. To clean heavy soil, use a scouring pad such as steel wool, with plenty of water.

Oven Frame

Clean with hot water, soap-filled steel wool pads or cleaners. Rinse well with clean water and dry.

Oven Gasket

Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion.

It is necessary for the gasket to remain intact.

Replacing the Oven Light

Turn off the power at the main power supply.

Remove the lens cover from the housing by pulling straight out.

To prevent electrical shock or personal injury, make sure the oven and light bulb are cool and power to the oven has been turned off before replacing the light bulb. Make sure the lens cover is in place when using the oven.

Outer Oven Door

Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside door.

Do not use oven cleaners, cleansing powder or harsh abrasives on the outside of the door.

Inner Oven Door

Do not allow excess water to run into holes or slots in the door. Any soap left on the liner causes additional stains when the oven is heated.

Before you call for service, please review the potential problem, possible causes and remedies shown in the table below.

23

Page 23
Image 23
NXR BX3062 manual Care And Cleaning, Metal Finishes, Plastic Finishes, Oven Racks, Oven Frame, Oven Gasket, Outer Oven Door