OK International DX-200/215 specifications Items, Description, Symbol Definitions, Specifications

• If a piston is not used with the barrel, an inline filter (881-000-000) must be4 FEATURES installed on the receiver head to help prevent fluids from being sucked back

into the unit. Also do not overfill the barrel and to lay the barrel on its side

•Do not smoke or use open flame when flammable materials are being dispensed

•This equipment is for indoor use only

2 SYMBOL DEFINITIONS

Symbol	Definition
	Power On/Off
	Cycle Mode
	Timer
	Vacuum
	Pressure

2 3 4 9 11

	1		10
			5
			16
		6	15
8		7

12

14

3SPECIFICATIONS

Size	152mm X 165mm X 178mm
	(6” X 6.5” X 7.0”)
Weight	1.2 kg (2.6lbs)
Input Voltage	24VDC
Rated Power	10W
Air Input	100 psi (6.9 bars) Max.
Pollution Degree	II
Installation Category	I
Indoor Use	Altitude up to 2,000m (6,562ft)
Operating Temperature	0˚C to 50˚C (32˚F to 122˚F)
Storage Temperature	-10˚C to 60˚C (14˚F to 140˚F)
Max. Relative Humidity	80% for temperature up to 31˚C (87.8˚F) Decreasing
	linearly to 50% relative humility at 40˚C (104˚F)
Air Output	0-100 psi (0-6.9 bars)
Vacuum	406mm (16”) of Hg
Timer	0.020-99.999 seconds
Cycle Mode	Manual, Timed
Timing Repeat Tolerance	+/- 0.001%
Cycle Rate	600 cycles/min
LCD	16 X 2 display segments

	Figure 1.0
Items	Description
1	Power Button
2	Mode Button
3	Set up/Save Button
4	Display
5	Air Pressure Gauge
6	Air Pressure Regulator
7	Pulsed Air Outlet
8	Vacuum Control
9	Receiver head air hose holder
10	Foot Switch Receptacle
11	Power Receptacle
12	I/O Connection
13	Accessory Air Outlet
14	Exhaust Port
15	Air Inlet
16	Cord Lock

3 4