Oki 425S manual Developer’s Guide English

3Multi-part Paper

The standard multi-part paper is the one whose top edge is pasted.

1

2

5

7

8

3

6

	4
1	Pasted securely (1mm)	5	Paper inserting direction
2	Base line	6	Printing area
3	First character position	7	Against the perpendicular to the Base line
4	Printing surface	8	+ 0.2mm or less

Standard media are in A5 and B5 sizes.

Symbol

W

L

A

B

C

D

E

Designation

Paper width

Paper Length

Top margin

Bottom margin

Left margin

Right margin

Printing area width

Standard Value

105~215.9mm (4.13~8.5 inch)

70~297mm (2.76~11.7 inch)

6.35mm (1/4 inch)

19.6mm (0.77 inch)

2.54mm (0.1 inch) or more

This distance may be adjusted from 2.54 to 27.94mm (0.1~1.1 inch) by moving the paper guide. D=2.54 mm can set only for a sheet whose W=190.5mm (7.5 inch) or shorter

Max 160.02mm (6.3 inch)

Note 1 The height-width ratio must be 1 : 2/3 – 2.

Note 2 Use a flat sheet free of curls, bends (especially those on its edges), cambers, wrinkles, etc. If a sheet is not flat, it may be contaminated with ink due to ink ribbon contact.

Note 3 Wide paper with the left or right edge pasted should be printed carefully, since it may twist during feeding. Note 4 Only a multi-part slip can be used for printing. (Insert it from the front side of the printer.)

Developer’s Guide: English 71