Symbol
W
L
A
B
C
D
E
F
G
H
I
J
Designation
Paper width
Paper length
Heading position
Top margin (on the 1st page)
Bottom margin, recommended
Bottom margin, printable
Top margin, recommended
Top margin, printable
Bottom margin, recommended
Bottom margin, printable
Unprintable left margin
Unprintable right margin
Standard Value
76.2~215.9mm (3~8.5 inch)
76.2~355.6mm (3~14 inch)
The length must be the one obtained via multiplying 25.4mm (1 inch) by an integer
10.31mm (0.41 inch)
25.4mm (1 inch)
19.05mm (3/4 inch)
6.35mm (1.4 inch)
25.4mm (1 inch)
10.31mm (0.41 inch)
198mm (7.8 inch)
19.6mm (0.77 inch)
11.43mm (9/20 inch)
Paper width is 203.2mm (8 inch) or less: 11.43~21.59mm (9/20~0.85 inch)
Paper width is 215.9mm (8.5 inch): 20.39~21.59mm (0.8~0.85 inch)
Note 1 Though you can print within the light shaded area (printable area), feeding may be less accurate.
Note 2 The print quality on the last page is not warrantied.
Note 3 Printing out of the designated printing area may result in poor printing quality or malfunction of the unit. Set the printing format cautiously.
Note 4 The horizontal perforated line should be placed in the middle of the sprocket hole interval. A horizontal perforated line close to a sprocket hole may let the paper slip off the holes, resulting in a paper jam.
Note 5 Auto parking function of Sprocket paper can operate up to 14".
