Regulatory Information
Federal Communications Commission (FCC) Requirements for End Users
This device has been granted a registration number by the Federal Communications Commission, under Part 68 rules and regulations for direct connection to the tele- phone lines. In order to comply with these FCC rules, the following instructions must be carefully read and appli- cable portions followed completely.
1This equipment complies with Part 68 of FCC rules. On the back of the equipment is a label that con- tains, among other information, the FCC registra- tion number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.
2The following USOC jacks may be used with this equipment: RJ11C.
3The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive REN’s on the telephone line may result in the devices not ringing in response to an emergency call. In most, but not all areas, the sum of the REN’s should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total REN’s, contact the telephone company to deter- mine the maximum REN for your calling area.
4If the equipment causes harm to the telephone network, the telephone company will notify you in advance. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
