THE STATUS MONITOR

The Status Monitor software is distinct from and installed separately from the driver software.

NOTE

For reliable operation of the Status Monitor, ensure that the USB cable is of length 2m maximum.

The Status Monitor provides a readable indication of the printer status as displayed on the indicator LEDs on the Status Panel (See “The Status Panel” on page 9.) and allows you to access the printer menus (listed at the end of this chapter) to set printer parameters such as paper size etc.

USING THE STATUS MONITOR

NOTE

You are advised to refer to the extensive on-line help as required when using the Status Monitor.

Viewing the status of the printer, and viewing or changing the printer menu settings are carried out as follows:

1.Click on [Start], [All Programs] and select OkidataOKI C3200Printer Name Status Monitor. The current printer status is shown.

The Status Monitor> 35