13.Close the top of the side cover up to the printer and refit the securing screw removed in step 4.
14.Close the front cover and close the top cover, pressing down firmly at each side to latch it closed.
15.Reconnect the AC power cable and switch the printer on.
16.When the printer is ready, print a menu map by holding down the ON LINE button on the Status Panel for 2 seconds.
17.Examine the first page of the menu map.
Near the top of the page, between the two horizontal lines, you will see the current printer configuration. This list contains the figure for total memory size.
This should indicate the total memory now installed, which should be the size of memory board you have installed plus 32MB.
Installing additional memory> 72