SYSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you prefer to work.
SYSTEM CONFIGURATION MENU
ITEMS | SETTINGS | EXPLANATION |
POW SAVE TIME | 5 MIN | Adjusts the idling time before the |
| 15 MIN | printer automatically switches into |
| 30 MIN | power saving mode. In this mode |
| 60 MIN | power consumption is reduced to a |
| 240 MIN | low level required to just keep the |
|
| printer operating and ready to |
|
| receive data. When a job is sent the |
|
| printer will require a |
|
| of up to 1 minute before printing can |
|
| begin. |
|
|
|
CLEARABLE | ON | When ON, |
WARNING | JOB | such as requests for a different |
|
| paper size, can be cleared by |
|
| pressing the ON LINE button. When |
|
| set to JOB, they are cleared when |
|
| the print job resumes. |
|
|
|
MANUAL | OFF | Specifies how many seconds the |
TIMEOUT | 30 SEC | printer will wait for paper to be fed |
| 60 SEC | in manual feed mode before |
|
| cancelling the job. |
|
|
|
WAIT TIMEOUT | OFF | Specifies how many seconds the |
| 5~90~300 | printer will wait when received data |
|
| pauses before forcing a page eject. |
|
| In PostScript Emulation mode the |
|
| job will be cancelled if timeout |
|
| occurs. |
|
|
|
LOW TONER | CONTINUE | Specifies whether the printer should |
| STOP | continue printing even after a low |
|
| toner condition is detected. |
|
|
|
JAM RECOVERY | ON | Specifies whether the printer should |
| OFF | perform jam recovery after a paper |
|
| jam has occurred. If ON, the printer |
|
| will attempt to print again any pages |
|
| lost due to a paper jam once the jam |
|
| has been cleared. |
|
|
|
ERROR REPORT | ON | Specifies whether to print an error |
| OFF | report when an internal error occurs. |
The Status Monitor> 45