![](/images/new-backgrounds/1149543/14954343x1.webp)
ADVANCED TAB
1
2
3
54
6 |
7 |
98 |
10 |
12
11
1.You can specify which times of day your printer will be available.
2.Indicates current priority, from 1 (lowest) to 99 (highest). Highest priority documents will print first.
3.Specifies that documents should be spooled (stored in a special print file) before being printed. The document is then printed in the background, allowing your application program to become available more quickly.
4.This specifies that printing should not start until the last page has been spooled. If your application program needs a lot of time for further computation in the middle of printing, causing the print job to pause for more than a short period, the printer could prematurely assume that the document has finished. Selecting this option would prevent that situation, but printing will be completed a little later, as the start is delayed.
5.This is the opposite choice to the one above. Printing starts as soon as possible after the document begins spooling.
6.This specifies that the document should not be spooled, but printed directly. Your application will not normally be ready for further use until the print job is complete. This requires less disk space on your computer, since there is no spool file.
Printer settings in Windows> 22