This menu controls the operation of the printer’s USB data interface.
ITEM | SETTINGS | EXPLANATION |
|
|
|
SOFT RESET | ENABLE / | Enables or disables the SOFT RESET |
| DISABLE | command. |
|
| |
SERIAL NUMBER ENABLE / |
| |
| DISABLE |
|
|
|
|
SPEED | 12 / 480 Mps | Selects the interface speed |
NETWORK MENU
This menu controls the operation of the printer’s
ITEM | SETTINGS | EXPLANATION |
|
|
|
TCP/IP | ENABLE / | Enables or disables this network |
| DISABLE | protocol. |
|
|
|
NETBEUI | ENABLE / | Enables or disables this network |
| DISABLE | protocol. |
|
|
|
IP ADDRESS | AUTO / MANUAL | Specifies whether IP address |
SET |
| allocation is automatic (DHCP) or |
|
| manually assigned. |
|
|
|
IP ADDRESS | xxx.xxx.xxx.xxx | Current assigned IP address. To |
|
| change, press ENTER and use +/– |
|
| keys to increment 1st octet, then |
|
| press ENTER again to move on to |
|
| next octet. When 4th octet has been |
|
| set, press ENTER again to register |
|
| new address. |
|
| |
SUBNET MASK | xxx.xxx.xxx.xxx Current assigned subnet mask. To | |
|
| change, proceed as above. |
|
| |
GATEWAY | xxx.xxx.xxx.xxx Current assigned gateway address. | |
ADDRESS |
| To change, proceed as above. |
|
|
|
FACTORY | EXECUTE | Reloads the settings present when |
DEFAULTS |
| the unit was setup by the |
|
| manufacturer. |
|
|
|
WEB | ENABLE / | Enables or disables Web config. |
| DISABLE | facility. |
|
|
|
TELNET | ENABLE / | Enables or disables Telnet config. |
| DISABLE | facility. |
Menu functions> 75