MEMORY UPGRADE

The basic printer model comes equipped with 64MB of main memory. This can be upgraded with an additional memory board of 64MB or 256MB, giving a maximum total memory capacity of 320MB.

Installation takes a few minutes, and requires a medium size cross-head (philips type) screwdriver.

1.Switch the printer off and disconnect the AC power cable.

2.Press the cover release and open the printer’s top cover fully.

WARNING!

If the printer has been powered on recently, the fuser will be hot. This area is clearly labelled. Do not touch.

3.Lift the front cover latch and pull open the front cover.

4.Remove the screw (1) securing the right-hand side cover.

1

Installing upgrades> 97