This menu controls the operation of the printer’s USB data interface.
ITEM | SETTINGS | EXPLANATION |
|
|
|
SOFT RESET | ENABLE / | Enables or disables the SOFT RESET |
| DISABLE | command. |
|
|
|
SERIAL NUMBER | ENABLE / | Sets the maximum USB I/F transfer |
| DISABLE | speed |
|
|
|
SPEED | 12 / 480 Mps | Selects the interface speed |
|
|
|
NETWORK MENU
This menu controls the operation of the printer’s
ITEM | SETTINGS | EXPLANATION |
|
|
|
TCP/IP | ENABLE / | Enables or disables this network |
| DISABLE | protocol. |
|
|
|
NETBEUI | ENABLE / | Enables or disables this network |
| DISABLE | protocol. |
|
|
|
IP ADDRESS | AUTO / MANUAL | Specifies whether IP address allocation |
SET |
| is automatic (DHCP) or manually |
|
| assigned. |
|
|
|
IP ADDRESS | xxx.xxx.xxx.xxx | Current assigned IP address. To |
|
| change, press ENTER and use +/– |
|
| keys to increment 1st octet, then press |
|
| ENTER again to move on to next octet. |
|
| When 4th octet has been set, press |
|
| ENTER again to register new address. |
|
|
|
SUBNET MASK | xxx.xxx.xxx.xxx | Current assigned subnet mask. To |
|
| change, proceed as above. |
|
|
|
GATEWAY | xxx.xxx.xxx.xxx | Current assigned gateway address. To |
ADDRESS |
| change, proceed as above. |
|
|
|
FACTORY | EXECUTE | Reloads the settings present when the |
DEFAULTS |
| unit was setup by the manufacturer. |
|
|
|
WEB | ENABLE / | Enables or disables Web config. facility. |
| DISABLE |
|
|
|
|
Menu functions > 62