Oki C5850 manual 64

SYS ADJUST MENU

Not displayed as default. This menu is displayed only when set to ENABLE in OP MENU of Administrator menu.

ITEM	SETTINGS	EXPLANATION
X ADJUST	+2.0mm	Adjusts the position of a whole print
	~	image in the direction perpendicular to
		the direction the paper runs, that is
	0
		horizontally, in 0.25 mm increments.
	~	Any parts of the print image that are
	-2.0mm	outside the printable area as a result of
		this shift will be cropped.
Y ADJUST	+2.0mm	Adjusts the position of a whole print
	~	image in the direction the paper runs,
		that is vertically, in 0.25 mm
	0
		increments.
	~	Any parts of the print image that are
	-2.0mm	outside the printable area as a result of
		this shift will be cropped.
		Corrections in a negative value are
		ignored in PS mode.
DUPLEX X	+2.0mm	If the Duplex option is installed, when
ADJUST	~	printing the reverse page of a duplex
		job, adjusts the position of the whole
	0
		print image in the direction that is
	~	perpendicular to the direction the paper
	-2.0mm	runs, that is horizontally, in 0.25 mm
		increments.
		Any parts of the print image that are
		outside the printable area as a result of
		this shift will be cropped.
DUPLEX Y	+2.0mm	If the Duplex option is installed, when
ADJUST	~	printing the reverse page of a duplex
		job, adjusts the position of the whole
	0
		print image in the direction the paper
	~	runs, that is vertically, in 0.25 mm
	-2.0mm	increments.
		Any parts of the print image that are
		outside the printable area as a result of
		this shift will be cropped.
		Corrections in a negative value are
		ignored in PS mode.
DRUM	ON	Sets whether to rotate the drum in idle
CLEANING	OFF	prior to printing in order to reduce any
		horizontal white lines.
		CAUTION: Each additional rotation
		will shorten the Image Drum life by
		that amount.

Menu functions > 64