5.Print a menu map as follows:

(a)Press the + button to access the Information Menu.

(b)Press ENTER once for the menu map.

(c)Press ENTER again to print the menu map.

(d)When the menu map is printed, press ON LINE to exit the menu system.

6.Examine the first page of the menu map.

Near the top of the page, between the two horizontal lines, you will see the current printer configuration. This list should indicate that the duplex unit is now installed.

All that remains is to adjust the Windows printer driver to make full use of the new features (“Adjusting Windows printer drivers” on page 96).

MEMORY UPGRADE

The basic printer model comes equipped with 64MB of main memory. This can be upgraded with an additional memory board of 64MB or 256MB, giving a maximum total memory capacity of 320MB.

Installation takes a few minutes, and requires a medium size cross-head (Philips type) screwdriver.

1.Switch the printer off and disconnect the AC power cable.

2.Press the cover release and open the printer’s top cover fully.

WARNING!

If the printer has been powered on recently, the fuser will be hot. This area is clearly labelled. Do not touch.

Installing upgrades > 91