Oki C9500 V2, C7500 V2 manual APPENDIX- E-MAIL Alert Function

APPENDIX– E-MAIL ALERT FUNCTION

The following table explains how to set up the E-Mail Alert function via Telnet.

7: Setup SMTP 1: SMTP Transmit		Set sending E-Mail via SMTP,
(E-Mail)		enabled or disabled.
2: SMTP Receive		Set receiving E-Mail via
		SMTP, enabled or disabled.
3: SMTP Server		Set IP address or host name
Name		of SMTP server.
4: SMTP Port		Set port number of SMTP.
Number
5: E-mail Address		Set the E-Mail address used
		for [From] field in the mail
		header.
6: Reply-To		Set the E-Mail address used
Address		for [Reply-To] field in the mail
		header.
7: Destination	1: To Address 1–5	Up to five E-Mail addresses to
Address 1–		which E-Mail alerts can be
11: Destination		sent.
Address 5	2: Notify mode	Select how to notify
		warnings/errors via E-
		Mail.When any specified
		status changes, E-Mail is sent
		immediately if "EVENT" is
		selected, or periodically if
		"PERIOD" is selected.
	3: Check time (hours)	Set duration (1-24 hours) to
		send E-Mail when you select
		"PERIOD" as Notify mode.

Appendix– E-Mail Alert Function 105