![](/images/new-backgrounds/1119736/11973639x1.webp)
Location | Comments |
Printer Trap | By selecting the button, the following dialogue box is displayed: |
Setup . . . |
|
In the dialogue box, the following items can be configured:
Printer Trap | This community name is assigned to outgoing |
Community Name | printer status traps such as |
| etc. |
Set the IP address to which a Trap packet will be | |
| sent. You can set up to five IP addresses. |
Detail . . . | By selecting the button, the following dialogue |
| box is displayed: |
In the dialogue box, the following items can be configured:
Trap Enable | Set sending a Trap |
| packet, enabled or |
| disabled, for each |
| destination. |
Printer Reboot | Set sending a Trap |
| packet, enabled or |
| disabled, when the |
| printer is rebooted. |
Receive Illegal | Set sending a Trap |
| packet, enabled or |
| disabled, when the |
| printer receives an |
| illegal Trap packet. |
Set sending a Trap, | |
| enabled or disabled, |
| when the printer turns |
| to |
Network Configuration 20