ES 1220n Postscript Emulation Driver • 70
Once someone has set up all the necessary overlay files on the
printer, other users only have to switch on the required settings in the
printer driver to use the overlays.
Creating Documents To Use As Overlays
An overlay can be created in any software application that can
handle logos, letterheads, forms, etc. and can print to a file.
1. With the file to be stored as an overlay open in your application
program, choose File then Print.
2. Ensure that the Print To File option is switched on in your
application's Print dialog box.
3. Depending on the application, you may need to select your
printer model, and then click Properties… This should open the
printer driver settings.
NOTE
The internal hard disk must be installed in the printer to
allow for spooling of the print job before final printing.
If the hard disk memory is insufficient for the spooled
data, DISK FULL is displayed and only one copy printed.
If the software application being used has a collate print
option, this must be turned OFF for overlay to operate
correctly.
An overlay may consist of more than one component
files.