110 Using the Copier
2Press the Copy key.
3Specify the desired copy settings.
" For details on specifying the copy mode and the copy density, refer to
“Specifying the Copy Quality Setting” on page 110.
For details on specifying the zoom ratio, refer to “Specifying the Zoom
Ratio” on page111.
For details on selecting the media tray, refer to “Selecting the Media
Tray” on page112.
For details on setting 2in1 copying, refer to “Setting 2in1 Copying” on
page113.
For details on ID card copying, repeat copying or poster copying, refer
to “Setting a Copy Function” on page114.
For details on duplex (double-sided) copying, refer to “Setting Duplex
(Double-Sided) Copying” on page 118.
For details on setting collated copying, refer to “Setting Collated (Sort)
Copying” on page 120 .
4Using the keypad, specify the desired number of copies.
" If the number of copies was incorrectly entered, press the Back key,
and then specify the correct number of copies.
5To print color copies, press the Start-Color key. To print monochrome copies,
press the Start-Mono key.
Copying begins.
" If the Stop/Reset key is pressed while copying, JOB CANCEL
appears. To stop copying, select YES. To continue copying, select
NO.
Specifying the Copy Quality Setting
Select the document type and copy density appropriate for the contents and den-
sity of the document to be copied.
Selecting the Document Type
1In the main screen (Copy mode), press the up or down arrow key to select
the current copy quality setting, and then press the Enter key.
2Press the up or down arrow key to select MODE, and then press the Enter
key.
3Press the up or down arrow key to select MIX, TEXT, PHOTO, FINE/MIX,
FINE/TEXT or FINE/PHOTO, and then press the Enter key.
The main screen (Copy mode) appears again.