141 Using the Scanner
4Press the up or down arrow key to select CHECK/EDIT, and then press the
Enter key.
5Press the up or down arrow key to select the address to be deleted from the
favorite list, and then press the Stop/Reset key.
6Press the up or down arrow key to select YES, and then press Enter key.
The selected address is deleted.
7To delete another address, repeat the procedure from step 5.
8To finish deleting addresses, press the Back key.
9Press the up or down arrow key to select FINISH, and then press the Enter
key.
Registering Speed Dial Destinations (Direct Input)
E-mail addresses can be registered as speed dial destinations. A maximum of
250 speed dial destinations can be registered.
" Machine key operations cannot be used to register an FTP address or
SMB address as a speed dial destination. These addresses can be regis-
tered with the Setup Utility.
" Speed dial destination numbers 221 to 250 are reserved for registering
FTP addresses and SMB address from the Setup Utility.
1In the main screen (Scan mode), press the up or down arrow key to select
UTILITY, and then press the Enter key.
2Press the up or down arrow key to select DIAL REGISTER, and then press
the Enter key.
3Press the up or down arrow key to select SPEED DIAL, and then press the
Enter key.
4Use the keypad to type in the number (between 1 and 220) for the speed dial
destination, and then press the Enter key.
5Press the up or down arrow key to select MANUAL SETTING, and then press
the Enter key.
" If an LDAP server is not specified, step 5 is skipped.
6Use the keypad to type in the registration name, and then press the ENTER
key.
" For details on entering/editing text, refer to “Entering Text” on
page265.
" A maximum of 20 characters can be entered.