142 Using the Scanner
7Use the keypad to type in the e-mail address, and then press the Enter key.
The settings are registered, and the DIAL REGISTER menu appears again.
" A maximum of 64 characters can be entered.
Registering Speed Dial Destinations (LDAP Search)
E-mail addresses can be registered as speed dial destinations by using informa-
tion on the LDAP server. A maximum of 250 speed dial destinations can be reg-
istered.
" To connect to an LDAP server, settings for LDAP SETTING must be
specified.
" Machine key operations cannot be used to register an FTP address or
SMB address as a speed dial destination. These addresses can be regis-
tered with the Setup Utility.
" Speed dial destination numbers 221 to 250 are reserved for registering
FTP addresses and SMB address from the Setup Utility.
1In the main screen (Scan mode), press the up or down arrow key to select
UTILITY, and then press the Enter key.
2Press the up or down arrow key to select DIAL REGISTER, and then press
the Enter key.
3Press the up or down arrow key to select SPEED DIAL, and then press the
Enter key.
4Use the keypad to type in the number (between 1 and 220) for the speed dial
destination, and then press the Enter key.
5Press the up or down arrow key to select LDAP SEARCH, and then press the
Enter key.
" If an LDAP server is not specified, LDAP SEARCH does not appear.
6Press the up or down arrow key to select NAME or E-MAIL, and then press
the Enter key.
" To search registered names, select NAME. To search e-mail
addresses, select E-MAIL.
7Use the keypad to type in the search keyword (maximum of 10 characters),
and then press the Enter key.
The search begins, and the search results appear after a while. If no data
matches the search keyword, NOT FOUND appears for about two seconds.
" For details on entering/editing text, refer to “Entering Text” on
page265.