Loadimg the Multi Purpose Tray > 24
3. Ensure that the paper is loaded below the arrow level to avoid paper jam.
Media Loading Tips• For single-sided printing on headed paper load the paper with the pre-printed side
up and top edge into the printer.
• For two-sided (duplex) printing on letterhead paper, load the paper with the pre-
printed side down and top edge away from the printer.
• Envelopes should be loaded flap down, face up with the top edge to the left and
short edge into the printer.
• Load Transparencies face up and top edge into the printer.
4. If required, set the media size and orientation in the media menu using the control
panel, then issue the print command.
Note
Do not exceed the paper capacity of approximately 50 sheets or 10
envelopes depending on the media weight.
Note
Do not select Duplex printing on envelopes.
CAUTION!
Damage to the printer may occur if the incorrect paper setting is
used when printing on a different media.
Notes
• You can also set the media type in your printer driver. However, the
printer driver settings will override the settings on the control panel.
• Remember to reset the printer for normal paper after printing on a
different media.