TROUBLESHOOTING
PROBLEM | SOLUTION |
IR remote inoperative | Verify that the batteries in the remote are fresh. |
| Verify that the remote sensor eye is not obstructed. |
|
|
Disc won't play | Insert a disc with the label side facing upwards. |
| Check the type of disc you put into disc tray. This DVD only plays DVD, audio CD and |
| MP3. |
| Both the unit and the disc are coded by region. If the regional codes don’t match, the |
| disc can’t be played. |
|
|
Play starts, but then stops immediately | The disc is dirty. Clean it. |
| Condensation has formed. Allow player to dry out. |
|
|
No sound or distorted sound | Make sure your DVD is connected properly. Make sure all cables are securely |
| inserted into the appropriate jacks. |
| If you are using the |
| headphone power, make sure the correct channel |
| Make sure the Modulator is ON and the proper Frequency has been selected. |
| Make sure that unit is set to M1 when using Single Channel Headphones. |
|
|
Can’t advance through a movie | It can’t advance through the opening credits and warning information that appear |
| at the beginning of movies because the disc is programmed to prohibit that action. |
|
|
24
