Make sure the camera is loaded properly.

Check the following points before sealing the Case.

Is the digital camera loaded properly?

Is silica gel inserted deep in the specified location?

Is the O-ring attached properly to the opening on the Case?

Is there any dirt or foreign matter on the O-ring or the O-ring contact surface on the front lid?

Seal the Case.

Gently close the rear lid (so that the O-ring does not slip out of the groove). Hook the buckle on the edge of the rear lid, and tilt the buckle open/close lever in the direction of the arrow to hermetically seal the Case.

CAUTION : • Seal the Case by turning both buckle lock levers down in arrow direction. When one of the buckles is left open, the Case will not be sealed and water leakage will be caused.

E-18