Olympus B-20 LPC Charging the battery, Plug the AC power cord, into an AC power outlet, condition

Models: B-20 LPC

1 40
Download 40 pages 15.34 Kb
Page 12
Image 12
Charging the battery

Charging the battery

1 Connect the AC cable plug to the AC input connector on the charger.

2 Plug the AC power cord

To home AC outlet

into an AC power outlet.

 

3 Place the battery on the battery charger and slide it in until you hear a click.

The charging indicator may blink for an instant (less than one second) when the battery is inserted or just before charging is complete. However, this is normal and merely shows that the charger is communicating with the battery.

Terminal

Check the battery's status by the color of the charging indicator.

Charging

Charging indicator

Battery status

indicator color

condition

 

 

 

 

 

 

Charging is

Orange

Lit.

continuing

 

 

normally.

 

 

 

 

Lit.

Charging is

 

complete.

Green

 

Blinking.

An error has

 

 

occurred.*

 

 

 

 

Too much

 

 

charging time has

Red

Blinking.

passed. The

battery has

 

 

 

 

weakened or is

 

 

defective.*

*Remove the battery immediately. If the battery can not be fully charged under normal operating conditions, then it is most likely defective. Replace the battery with a new one.

Notes

In the following cases, it should be assumed that this product is out of order. Unplug the AC power cord immediately and consult your local Olympus representative.

Charging has not finished after six hours.

The red or green charging indicator blinks after several charges.

12

Page 12
Image 12
Olympus B-20 LPC Charging the battery, Connect the AC cable plug to the AC input connector on the charger, Battery status