Step, Preparing the battery pack | Uniden EXAI 7980 guide

Step 3

Preparing the battery pack

Charge the battery pack for more than 12-15 hours before connecting the phone line.

1 Press and slide the battery compart- ment cover toward the bottom of the unit.

2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment.

Black

Red

3 Securely close the battery compart- ment cover by sliding it up until it snaps into place.

4 Place the handset on the base unit with the keys and display facing upward.

This position lets you see Caller ID messages on the display.

Total:00

When the handset has been properly placed on the charging terminals of the base unit, the “status” LED of the base unit lights and charging begins. Charge the battery for 12-15 hours.

You can place either side up for charg- ing the battery.

status LED

9

Image 9

Uniden EXAI 7980 owner manual Step, Preparing the battery pack

Contents

Exai Introduction Features Table of contents 6 to Read this first9 to10 11 to Step Checking the package contents Choose the best location Setting up the base unit Connect the base unit Tips Choose the dialing mode Preparing the battery pack Battery use time per charge When the battery charge becomes lowCleaning the battery contacts Setting Caller ID options Entering your area code On-hook dialing Making calls Off-hook dialing Redialing On-hook redialingOff-hook redialing Any key when ringing Auto Talk when ringingAny key when paging Receiving calls Handset ringer tone Handset ear speaker volume Base ringer switch Base speaker volumeReceiving a call from the base Storing phone numbers and names Memory storing Dn »key to scroll through the characters Memory dialing Making calls with memory dialingOn-hook dialing Display a Programmed Number Off-hook dialing Editing a stored name and/or phone number Memory editing Use the #/ 1 and */tone/0 Erasing a stored name and/or phone number Memory erasing Caller ID Caller ID service Here are some typical displays When the telephone rings Viewing the Caller ID Message list Long Distance call settings and cancellation Deleting a Caller ID message Deleting information from the Caller ID list Deleting all Caller ID name/numbers Using the Caller ID list Calling a party from the Caller ID listLong Distance calls Storing Caller ID messages in Memory Using Caller ID with call waiting service Setting the clock Using the answering machine Changing the greeting Recording the greeting Turning the answering machine on and off Setting the number of rings Setting maximum recording time for incoming messages Setting the toll saver switch Playing recorded messages Screening incoming calls Deleting recorded messages Leaving a voice memo Recording a phone conversation 2-way REC Selecting a PIN code Remote access Remote room monitor When speaking on the base When speaking on the handsetAdditional information Way conversation Changing the digital security code Standard wall plate mounting Mounting the base unit on a wall Direct wall plate mounting Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingPower Failure Symptom Suggestion Troubleshooting Additional information General SpecificationsBase unit Handset G, H IndexK, L W, X, Y, ZPage Uniden America Corporation