Caller ID (continued)
Storing Caller ID messages in Memory
Messages shown in the Caller ID list can be stored for memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone number of the party on the Caller ID list can be stored in memory dialing.
1 Press call id .
2 Display the phone number to be stored from the Caller ID list. (See page 28.)
5/17 12:30PM 03
UNIDEN CORP
3 Press mem .
Select Location
1 UNIDEN CORP
2 JONE DOE
4 Press ¥up or dn »to select the memory location where you wish to store the name and number from caller ID.
Press the dial buttons ( 0 to 9 ) and select the number (01 to 20).
5 Press select .
A beep tone will sound. The number is stored in memory, and the display returns to the Caller ID list.
5/17 12:30PM 03
UNIDEN CORP
Notes |
|
|
|
• If a message has already been stored in the select- | Replace Memory ? | ||
ed memory numbers location, a verification screen | Yes | ||
is displayed. | to select “Yes”. | No | |
Press | ¥up |
| |
Press | select | to overwrite. The display returns to the Caller ID list. | |
•You can not store a Caller ID message if no phone number appears in the message.
•If no key is pressed for more than 20 seconds, an error tone sounds and the telephone returns to the standby mode.
•If there is an incoming call or page, memory storage is cancelled and the telephone is set to the incoming call or page. If you get an incoming call, memory storage is cancelled.
32
