Manuals / Uniden / Communications / Cordless Telephone

Uniden EXAI 7980 owner manual Maintenance, Battery replacement and handling, Power Failure

Models: EXAI 7980

1 56

Download 56 pages 4.91 Kb

Page 50

Additional information (continued)

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL-CADMIUM BATTERIES

NICKEL-CADMIUM

BATTERIES MUST BE

DISPOSED OF

PROPERLY.

Ni-Cd

Nickel-cadmium cells are used in the bat- tery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel-cadmium batteries.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral deter- gent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

50

Image 50

Uniden EXAI 7980 owner manual Maintenance, Battery replacement and handling, Power Failure

Contents

Exai Features IntroductionTable of contents 9 to10 Read this first6 to 11 toChecking the package contents StepSetting up the base unit Choose the best locationConnect the base unit Choose the dialing mode TipsPreparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Setting Caller ID options Entering your area code Making calls On-hook dialingOff-hook dialing Off-hook redialing RedialingOn-hook redialing Any key when paging Auto Talk when ringingAny key when ringing Receiving callsHandset ear speaker volume Handset ringer toneReceiving a call from the base Base ringer switchBase speaker volume Memory storing Storing phone numbers and namesDn »key to scroll through the characters On-hook dialing Memory dialingMaking calls with memory dialing Off-hook dialing Display a Programmed NumberMemory editing Editing a stored name and/or phone numberUse the #/ 1 and */tone/0 Memory erasing Erasing a stored name and/or phone numberCaller ID service Caller IDWhen the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers Long Distance calls Using the Caller ID listCalling a party from the Caller ID list Storing Caller ID messages in Memory Using Caller ID with call waiting service Using the answering machine Setting the clockRecording the greeting Changing the greetingSetting the number of rings Turning the answering machine on and offSetting the toll saver switch Setting maximum recording time for incoming messagesPlaying recorded messages Deleting recorded messages Screening incoming callsLeaving a voice memo Recording a phone conversation 2-way REC Selecting a PIN code Remote access Remote room monitor Additional information When speaking on the handsetWhen speaking on the base Way conversationChanging the digital security code Mounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Troubleshooting Symptom SuggestionAdditional information Base unit SpecificationsGeneral HandsetK, L IndexG, H W, X, Y, ZPage Uniden America Corporation