Checking the image processing function

(PIXEL MAPPING)

The pixel mapping feature allows the camera to check and adjust the CCD and image processing functions. It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait at least one minute after taking or viewing pictures to allow for proper performance of the pixel mapping function.

Top menu [MODE MENU] [SETUP] [PIXEL MAPPING]

g“How to use the menus” (P. 16)

1 When [START] is displayed, press Z.

The [BUSY] bar is displayed during pixel mapping. When pixel mapping is finished, the screen returns to the mode menu.

Note

SETUP MEM PIC CAM

PIXEL MAPPING

START

s

X

6

Settings

• If you turn the camera off during pixel mapping, start again from Step 1.

Adjusting the brightness of the monitor

This function lets you adjust the brightness of the monitor to make it easier to see the image.

Top menu[MODE MENU][SETUP][s]

g“How to use the menus” (P. 16)

• In : Top menu[SETUP] [s]

1 Adjust the brightness while

looking in the monitor, and whens

you have set the desired level, press Z.

• Pressing abrightens the monitor, and pressing cdarkens it.

SELECT GOOK

74