Using OLYMPUS Master

Connecting the camera to a computer

8

Note

•Operation is only guaranteed on a Macintosh equipped with a built-in USB port.

•QuickTime 6 or later and Safari 1.0 or later must be installed.

•Be sure to remove the media (drag & drop onto the trash icon) before performing the following operations. Failure to do so could result in unstable computer operation and the need to reboot.

•Disconnect the cable connecting the camera to the computer

•Turn off the camera

•Open the camera’s card cover

•Open the camera’s battery compartment cover

Windows

1 Insert the CD-ROM into the CD-ROM drive.

• The OLYMPUS Master setup screen is displayed.

• If the screen is not displayed, double-click the “My Computer” icon and click the CD-ROM icon.

2 Click the “OLYMPUS Master”.

•The QuickTime installation screen is displayed.

•QuickTime is required to use OLYMPUS Master. If the QuickTime screen is not displayed, QuickTime 6 or later is already installed on the computer. In this case, go to step 4.

94