
Direct printing (PictBridge)
If an error code is displayed
If an error code is displayed on the camera’s monitor during direct print setting or printing, see the following table.
For more details, refer to the printer’s instruction manual.
Monitor indication | Possible cause | Corrective action | |||
|
|
| The camera is not | Disconnect the camera and | |
NO CONNECTION | connected to the printer | connect it again correctly. | |||
correctly. |
| ||||
|
|
|
| ||
|
|
| There is no paper in the | Load some paper in the | |
|
|
| printer. | printer. | |
|
|
| |||
NO PAPER | |||||
|
| ||||
|
|
| The printer has run out of | Replace the ink cartridge in | |
NO INK | ink. | the printer. | |||
|
| ||||
|
|
| The paper is jammed. | Remove the jammed paper. | |
JAMMED |
|
| |||
|
|
| The printer’s paper | Do not reconfigure the | |
SETTINGS CHANGED | cassette has been removed | printer after the settings have | |||
or the printer configuration | been made. | ||||
|
|
| has been changed. |
| |
|
|
| There is a problem with the | Turn off the camera and | |
|
|
| printer and/or camera. | printer. Check the printer and | |
PRINT ERROR |
| remedy any problems before | |||
| turning the power on again. | ||||
|
|
|
|
TIPS
•If an error code other than those shown above is displayed, see “Error codes” (P. 107).
7
pictures Printing
83