Direct Recording
Insert Recording
Additional recording can be inserted into a previously recorded file.
| Check ( )“Insert recording” box in | |
| 1the [Remote Edit] window. |
|
| Make sure you are at the right position | |
| 3,4 | 2in the file where recording insert | |
should take place. |
| |
While playing the file, move the slide | ||
| 3switch on the Directrec to the REC | |
| position or press the | (Record) |
button in the [Remote Edit] window to start inserting an additional recording. The red record/play indicator light on Directrec will become lit.
4Move the slide switch on the Directrec to the STOP position or press the 
(Stop) button in the [Remote Edit] window to the stop inserting the additional recording.
| 1 |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| 3 |
| 4 |
| ||
...................................................................................................................................... | ||||||
Notes |
|
| ||||
• Ensure that the “Insert recording” box in the [Remote Edit] window is checked or the | ||||||
| recording will not be inserted. |
|
| |||
• | If you place the slide switch in the STOP position for more than two seconds while moving | |||||
| the slide switch from the PLAY position to the REC position, the Inserted recording will be | |||||
| cancelled. |
|
| |||
• | You cannot select a different recording mode (SP, LP) than that of the original file before | |||||
16 | overwriting a recording. |
|
| |||
|
|
|
|
|
| |