Connecting to Your PCBe sure to finish installing DSS Player before connecting the recorder.

6

to Connecting

PC Your

Connecting to your PC using the

USB cable

1Release the HOLD switch.2Connect the USB connection cable to the USB port or the USB hub of the PC.

3Confirm that the recorder has stopped, and connect the USB cable to the connection port on the bottom of the recorder.

Please connect the USB connection cable mark to match themark of the recorder connection port.

“STORAGE REMOTE” is displayed on recorder if the USB cable is connected.

When the recorder is connected and “My Computer” is opened, a removable disk drive is displayed. If “Add New Hardware Wizard” appears, cancel the wizard by pressing the [Cancel] button and then install DSS Player.

....................................................................................................................................................

Notes

•When connecting this recorder with the PC and utilize DSS Player, in the menu setting of this recorder set the USB class to the “MASS STORAGE” class. If connected by “AUDIO CLASS”, this recorder will not be recognized as a removable disk drive.

•Be sure to use the attached dedicated cable for the USB connecting cable. If any other company’s cable is used, it will be the cause trouble. Also, please do not connect this dedicated cable to any other company’s

46 product.