Olympus DS-20 Noise Cancel Function, 1,2, level, Displays currently set Noise Cancel, The levels switch in the following rotation, “OFF” “LOW” “HIGH”

4

Cancel Noise

Function

Noise Cancel Function

If recorded audio is difficult to understand because of noisy surroundings, adjust the Noise Cancel setting level. Noise will be reduced in the file when its played back for better sound quality.

	Press and hold the MENU/SET
	1button for 1 second or longer
	while the file is playing.
	Displays currently set Noise Cancel
1,2	level.
	Press the MENU/SET button

2again to choose a noise cancel level.The levels switch in the following rotation, “OFF” “LOW” “HIGH”.

If the Noise Cancel level is set to “LOW” or “HIGH”, the level setting is displayed for 5 seconds when a file is played back.

To change the Noise Cancel level setting, press the MENU/SET button while the level setting is displayed.

....................................................................................................................................................

Notes

•If you set it to “LOW” or “HIGH”, the display flashes the Noise Cancel level for about 5 seconds when a file is played back.

•If you set Noise Cancel to “LOW” or “HIGH”, the setting remains valid until it’s set to “OFF”.

•Noise cancel cannot be used during fast playback/slow playback (☞ P.25).

•If the noise cancel is set to the file recorded in Stereo HQ or Stereo SP mode, it will be played back in monaural.

30