Olympus E-450 Resetting to the factory default settings, YES, [SET], RESET1, [RESET], [RESET], [RESET], [RESET1], [RESET2], [RESET1], [RESET2], [RESET1], [RESET2]

Resetting to the factory default settings

Normally, current camera settings (including any changes you have made) are retained when the power is turned off. To reset the camera to the factory default settings, set [RESET]. You can register settings in advance to [RESET1] and [RESET2]. The camera settings at that time are registered in [RESET1] and [RESET2]. For details on the registered functions, refer to “Functions that can be registered in Custom Reset Settings” (gP. 121).

1 Registering [RESET1]/[RESET2]

operations camera Basic

	Menu		MENU [W] [CUSTOM RESET]
1	Select either [RESET1]/[RESET2] to register and press d.
	•	If settings have already been registered, [SET] is displayed next to [RESET1]/[RESET2].
		Selecting [SET] again overwrites the registered setting.
2	•	To cancel the registration, select [RESET].
	Select [SET] and press the ibutton.

Using reset settings

You can reset the camera to [RESET1] or [RESET2] setting or restore the factory default settings.

[RESET]: Resets to the factory default settings. For the default settings, see “Menu directory” (gP. 122).

[RESET1]/[RESET2] : Resets to the registered settings.

Menu MENU [W] [CUSTOM RESET]

1 Select [RESET], [RESET1] , or [RESET2] and press the ibutton.2 Use acto select [YES], then press the i button.

RESET1

YES

NO

CANCEL SELECT GO

30

EN