3 Using live view

Activating live view

It is possible to use the LCD monitor as a viewfinder. You can view the exposure or white balance effect and the subject’s composition while you take the picture.

1 Press the ubutton.

• The mirror is raised and the subject is displayed on the LCD

 

monitor.

When [AF MODE] was set to [C-AF], it will be set

 

automatically to [S-AF](or [S-AF+MF]in case it was set to

 

[C-AF+MF]).

3

ubutton

view live Using

Functions available during live view

The following functions can be used during live view.

Focusing during live view

Taking a picture after selecting the AF system gP. 37

Taking a picture using focus lock gP. 38

Taking a picture while adjusting the focus manually gP. 40

Taking a picture while focusing on a face gP. 39

Taking a picture while checking the focus by enlarging the zone to be focused gP. 41

Taking a picture while checking the effect

• Taking a picture after comparing the effect of exposure compensation or white

 

balance gP. 41

• Taking a panoramic picture gP. 42

Switching the indications on the LCD monitor

Turning off the information display/Displaying the histogram or ruled lines gP. 40

Checking the subject on the monitor even in low light situations gP. 87

xNotes

If there is a high-intensity light source within the screen, the image may be displayed darker but will be recorded normally.

If the live view function is used over a long period, the temperature of the image pickup device rises causing images with high ISO sensitivity to appear noisy and unevenly colored. Either lower the ISO sensitivity or turn off the camera for some time.

Exchanging the lens will cause live view to stop.

The following functions are not available during live view. C-AF/AE lock/[AEL/AFL]

When [IMAGER AF] is selected, you cannot use the AF illuminator.

36

EN