Erasing images

Lets you erase recorded images. You can select single-frame erase, which erases only the currently displayed image; all-frame erase, which erases all the images stored on the card; or selected frame erase, which erases only the frames selected.

xNotes

•When you perform all-frame or selected frame erase on images recorded using RAW+JPEG, both the RAW and JPEG images are erased. When using single-frame erase, you can select whether to erase the JPEG, RAW, or both RAW and JPEG images. g“RAW+JPEG ERASE” (P. 89)

•Protected images cannot be erased. Cancel protected images, then erase them.

•Once erased, images cannot be restored. g“Protecting images” (P. 81)

Single-frame erase

1

Play back the image you want to erase and press

Sbutton

2

the Sbutton.

 

Use acto select [YES], then press the i

 

 

button.

 

Erasing selected frames

8

functions Playback

82

EN

This function lets you erase selected images at one time during single-frame playback or index display.

1

Display the images you want to erase and press the ibutton.

 

• The selected images will be shown with red frames.

 

• To cancel your selection, press the ibutton again.

 

• During index display, press pto select the images you want to erase and press the i

2

button.

Press pto display the next images you want to erase and press the ibutton.

3

After you have selected the images to erase, press the Sbutton.

4

Use acto select [YES], then press the ibutton.

All-frame erase

 

 

 

 

1

MENU [W] [CARD SETUP]

2

Use acto select [ALL ERASE], then press the ibutton.

3

Use acto select [YES], then press the ibutton.

• All frames will be erased.