Olympus E-5 Camera maintenance, camera, Control, Monitor, Storage, on again, to print, Exterior:, Viewfinder, while making, The printer’s, and/or camera, Possible cause

Viewfinder	Control	Monitor
	panel		Possible cause	Corrective action
indications		indication
	indications
			The printer’s
			paper cassette
			has been removed	Do not manipulate the
		SETTINGS	or the printer has
No indication	No indication			printer while making
		CHANGED	been manipulated
				settings on the camera.
			while making
			settings on the
			camera.
				Turn off camera and
			There is a problem	printer. Check the printer
No indication	No indication		with the printer	and remedy any problems
		PRINT ERROR	and/or camera.	before turning the power
				on again.
			Pictures recorded	Use a personal computer
No indication	No indication		on other cameras
			may not be printed	to print.
		CANNOT PRINT
			on this camera.

Camera maintenanceCleaning and storing the camera

maintenance and tips Shooting

12

Cleaning the cameraTurn off the camera and remove the battery before cleaning the camera.Exterior:

•Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and well wrung.

Monitor and viewfinder:• Wipe gently with a soft cloth.Lens, mirror and focusing screen:

•Blow dust off the lens, mirror and focusing screen with a commercially available blower. For the lens, wipe gently with a lens cleaning paper.

Storage

•When not using the camera for a prolonged period, remove the battery and card. Store the camera in a cool, dry place that is well ventilated.

•Insert the battery periodically and test the camera’s functions.Cleaning and checking the image pickup device

This camera incorporates a dust reduction function to keep dust from getting on the image pickup device and to remove any dust or dirt from the image pickup device surface with ultrasonic vibrations. Dust reduction is activated when the power switch is set to ON and when starting and stopping live view. The dust reduction function operates at the same time as the pixel mapping, which checks the image pickup device and image processing circuitry. Since dust reduction is activated every time the camera’s power is turned on, the camera should be held upright for the dust reduction function to be effective.

134

EN