Erasing images

Lets you erase recorded images. You can select single-frame erase, which erases only the currently displayed image; all-frame erase, which erases all the images stored on the card; or selected frame erase, which erases only the frames selected.

xNotes

•When you perform all-frame or selected frame erase on images recorded using RAW+JPEG, both the RAW and JPEG images are erased. When using single-frame erase, you can select whether to erase the JPEG, RAW, or both RAW and JPEG images. g“RAW+JPEG ERASE” (P. 115)

•Protected images cannot be erased. Cancel protected images, then erase them.

•Once erased, images cannot be restored. g“Protecting images” (P. 97)

Single-frame erase1 Display the images you want to erase and press the D button.2 Use acto select [YES], then press the i button.

7

functions Playback

D button

Erasing selected frames

This function lets you erase selected images at one time during single-frame playback or index display.

1

Display the images you want to erase and press the ibutton.

 

• The selected images will be shown with v.

 

• To cancel your selection, press the ibutton again.

2

• Press pto select the images you want to erase and press the ibutton.

After you have selected the images to erase, press the D button.

3

Use acto select [YES], then press the i button.

All-frame erase

 

 

 

 

1

MENU [W] [CARD SETUP]

2

Use acto select [ALL ERASE], then press the i button.

3

Use acto select [YES], then press the i button.

• All frames will be erased.

TIPS

To erase immediately:

j If you have set “QUICK ERASE” (gP. 115) to [ON], pressing the D button will erase an image immediately.

j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 116)

98

EN