Setting the focal length

 

 

By setting in advance the focal length of the lens, you can

 

 

use the image stabilizer function with lenses other than

 

j

Four Thirds system lenses. This setting is deactivated

 

 

 

when a Four Thirds system lens is attached.

 

 

1 Press the F button when the image stabilizer is

 

L F

 

 

 

2

turned on.

łŖŕŐ

HD

 

 

Use the dial or acto set the focal length and

 

 

press i.

•Choose the value that most closely matches to the one that is printed on the lens.

•You can assign [IS MODE] to the Fn button to use it as a direct button.

xNotes

•The image stabilizer cannot correct excessive camera shake or camera shake that occurs when the shutter speed is set to the slowest speed. In these cases, it is recommended that you use a tripod.

•When using a tripod, set [IMAGE STABILIZER] to [OFF].

•When using a lens with an image stabilization function, turn off the image stabilization function of either the lens or the camera.

•If [IMAGE STABILIZER] is set to [I.S.1], [I.S.2] or [I.S.3] and you turn off the camera, the camera will vibrate. This is due to the camera initializing the image stabilizer mechanism. Without this initialization, the image stabilizer may not be able to achieve the proper effect.

•If the image stabilizer icon blinks in red on the monitor, it indicates a failure of the image stabilizer function. If you take a picture as is, the composition may be off. Consult your Olympus Authorized Service Center.

3

functions shooting and Focusing

63

EN