Olympus E-5 P. 46, P. 47, noise, P. 50, P. 39, vision, camera, monitor, to to , value, set, art filter, recommended, easier to view, camera is level, Recording a movie

	Set the spot metering for highlight or shadow control. If
	the subject is not in the center of the picture, use AE lock	P. 46,
	to lock the exposure, and then change the composition	P. 48
Taking pictures so that	and take the picture.
whites come out white and	Adjust the exposure compensation. It may be helpful to	P. 47,
blacks come out black	use AE bracketing if you are not sure about the
		P. 49
	exposure compensation value.
	Set the gradation setting to [HIGH KEY] or [LOW KEY]	P. 71
	and take a picture.
	Set the ISO sensitivity to a low value, ISO 200 is	P. 50
	recommended.
Taking pictures without	Set [NOISE REDUCT.] to [AUTO] or [ON].	P. 72
noise
	When the ISO sensitivity is set to 3200 or another high	P. 72
	value, set [NOISE FILTER] to [HIGH].
	Adjust the viewfinder’s diopter in accordance with your	P. 13
	vision.
Making the viewfinder	If the viewfinder is still difficult to view after adjusting the
easier to view
	diopter or you want to use the viewfinder without	k
	eyeglasses, you can replace the viewfinder with the
	optional diopter compensation eyecup.
	You can adjust the brightness of the LCD monitor.	P. 99
Optimizing the LCD	During live view, set [LIVE VIEW BOOST] to [ON] to
monitor
	make the subject easier to see without the exposure	P. 109
	reflecting on the LCD monitor.
	Set the image stabilizer function.	P. 62
	Hold the camera firmly when pressing the shutter button.
	When using a slow shutter speed, be sure to stabilize	P. 16
	the camera by using a tripod or similar method.
Reducing camera shake	Fire the flash regardless of the light conditions.	P. 73
	Increase the ISO sensitivity. When ISO is set to [AUTO],	P. 50,
	set the upper limit to a high value, such as 1600, so that
		P. 111
	ISO automatically increases in low light situations.
	Using the self-timer can reduce camera shake that	P. 60
	occurs when the shutter button is pressed.
	You can display the level gauge to check whether the	P. 110
Taking pictures while	camera is level.
checking the level of the	Display the ruled lines in live view. Compose the shot so	P. 39,
camera
	that the subject and ruled lines are horizontally and
		P. 110
	vertically aligned.
Taking a picture using the	Set [PICTURE MODE] to to .	P. 70
art filter
Recording a movie	Activate the live view and press the nbutton.	P. 83

32

EN